Teach you how to use floor wax! What should I pay attention to when using?

Flooring on the floor: It is on the solid wood floor, pvc (plastic) floor, stone floor (marble, granite, terrazzo), etc., and the surface is coated with a layer of wax. After the wax is solidified, the air, moisture and dust are sealed. At the same time, it plays the role of anti-slip, anti-wear and anti-static, so as to better maintain the floor and extend the service life of the floor. Waxing is divided into two types: solid wax and liquid wax. Floor waxing requires professional waxing, wax layer, wax liquid should be evenly distributed, moderate thickness, so that the floor is bright and smooth.

600){this.width=600}” align=center src=”/userfiles/20170802171722920.jpg”>

The role of waxing:

Removal of stubborn stains on the floor, by waxing the material itself from the air, reducing damage to the material caused by oxidation or exposure to harmful substances in the air, prolonging the service life of the material and The purpose of the beauty of sightseeing is more important. The mirror surface is particularly durable and can prevent the damage of detergent, scratches, slips, heel friction, etc., and after polishing, the wax surface is harder and more resistant.

waxing operation procedures:

1, vacuum: in addition to the attachment on the surface of the floor and some adhesives, glue, cement, paint points, etc.. P>

2, cleaning: use electric mop, sauna machine, sterilization, cleaning, no damage to the floor.

3, waxing: for different floors, use different wax, even Wax.

4, Polishing: Professional operation + polishing machine is completed.

Wood floor waxing method:

1. Sunny waxing

>

The humidity in the rainy days is too high, and waxing will cause white turbidity.

When the room temperature is below 5 degrees, the floor wax will become hard.

Before waxing, do not wipe the floor with a rag containing chemicals, which will result in poor adhesion of the floor wax.

2. Remove dirt from the floor surface

Use a vacuum cleaner to remove dirt and dust from the floor surface.

Use a diluted neutral detergent to wipe the stain on the floor.

When it is difficult to remove the stain, it can be wiped with the water.

To prevent the detergent from accumulating in the groove, the rag soaked with detergent should be wrung out as much as possible.

Floor wax remover will cause stains and bulging on the floor, absolutely not to be used.

3. Wipe with a damp cloth

Use a rag that is wrung out to wipe.

The surface of the floor, especially the grooved part, should be carefully wiped, do not leave detergent.

If the residual detergent and moisture, it will lead to whitening and bulging.

4. Fully dry

The surface of the floor and the groove are completely dry and can be waxed. The time varies depending on the season, but it takes about half a day.

If not fully dried, the floor wax will not adhere to the surface of the floor, affecting the appearance and whitening phenomenon.

5.Washing

Shake the container with the floor wax and mix well.

Before the entire floor of the room is waxed, perform a partial trial at the corner of the room, and check for any abnormalities.

In order to prevent floor wax from polluting the wall skirting and furniture, cover the above parts with tape paper.

Use a clean rag to fully dip the floor wax, so it is better to not drip.

Do not pour the floor wax directly on the floor, otherwise it will produce traces and loop marks.

Carefully apply according to the direction of the wood grain of the floor, do not leak or thick and uneven.

too small amount of application will cause unevenness in the shade, too much smearing will lead to poor film formation.

Keeping thin and even is the key to waxing.

Do not dilute the floor wax with water.

waxing tool can use waxing special mop, easy to operate, and ideal results.




Relevant recommended products

New 2018 Plastic Pipe Used in Industrial Field for Irrigation

High Quality PPR Pipes Used in Industrial Field in 2018 from China Factory

Aluminum-Frame Formwork with Best Price and High Efficiency

Glass Roving (High Strength Roving) Fiberglass Roving

T451L Paver Cheap T451L Paver Buy at Okorde

Flooring industry: micro-invasive implant penetration is very important

WeChat was in a fire in 2012. In just two years, WeChat was almost all over China, and it was a great opportunity to catch up with QQ. In addition, flooring companies have carried out various micro-marketing to adapt to the development of the micro-era, because in this micro-era, we will not use WeChat marketing, and it will certainly be difficult to promote the brand.

WeChat is infiltrating into the flooring industry in the micro-era

In this micro-era, Weibo and WeChat have penetrated the flooring industry to give you every corner, and really affect the floor. industry. Weibo is a media platform, and WeChat is an authentic social platform. To put it simply, it is easy to understand. The biggest advantage of Weibo at the beginning of its rise is to spread the richest information at the fastest speed. So far, judging popular Weibo is still relying on two data, maximum forwarding and highest comment. WeChat is a communication application based on qq, which pays more attention to the main communication and intercommunication.

‘Micro-marketing’ under the ‘micro-era’, there are currently three types of micro-marketing that can be widely used, namely Weibo marketing, WeChat marketing and micro-film marketing. Let’s talk about the WeChat era:

The biggest advantage of WeChat is the maximum and most convenient interaction through voice. And because the interactive crowd is familiar with the flooring companies, and is constantly expanding in this familiar circle, so the most important thing for WeChat marketing is to make word of mouth. Here is word-of-mouth marketing. Just to say that word-of-mouth is extremely important. Whether it is making products or just making brands, word-of-mouth communication is one of the most important modes of communication.

Floor company WeChat marketing needs to focus on implantability

WeChat has a very good function is group chat, is a real group chat, you can have a large group of people in different places you Words, I chatted in a word. If it is different from ordinary chat, it can prove your chat content through text, pictures, videos and other means. For example, talk to your sister in the new clothes you bought, talk and chat, you will have pictures coming over, you will send the online platform for your clothes, chat and talk, many people have bought the same clothes. I look forward to the next party or a group of recent photos. For WeChat marketing, the key is not advertising, but the subtle implantation in the chat.

The future will be a micro era. More and more fast life rhythms, there will be more micro-products, micro-applications. In this situation of the need for concentrated expression, it is difficult to cater to people’s patience. What the floor company needs to do is to focus on one thing. It is most important to seize the point that is the most important and best able to show its advantages, and to constantly do it.

Release date: 2015/4/13 9:28:31


Relevant recommended products

EPS/XPS MGO Sandwich Panels,Structural Insulated Panel(SIP)

310w Poly Solar Panel For Home Use And Power Plant

Color Coated Aluminium Sheet For Automobile Parts

New PPR Pipe Used in Hot and Cold Water Conveyance

Gavalume steel coil and sheet

How to choose anti-static floor? Anti-static floor purchase considerations

1, three anti-static raised floor, using high-strength, fire-proof, waterproof materials as the substrate, double anti-static veneer. It has excellent waterproof and moisture-proof performance and strong bearing capacity, and is suitable for large and medium-sized computer rooms.

2, all steel anti-static raised floor, made of high-quality steel plate after stamping and welding, infused with high-strength lightweight materials. High strength, excellent waterproof, fireproof and moisture proof, suitable for large computer rooms with high load requirements.

600){this.width=600}” align=center src=”/userfiles/201708021733531325.jpg”>


Relevant recommended products

China New PPR Coupling for Landscape Irrigation Drainage System

Chrome Added Deformed Steel Round Bars

PP-R concealed concealed copper ball valve

Paint Tin Can Making Machine Production Line Flanging Seaming Machine

Cement-based Grouting Material high liquidity, early strength, high-strength

Smart home competition, it is not easy to stand firm

Image from “123rf.com.cn

From the pressure of industry giants, smart home companies are also facing a common problem — — network security. There are many smart home products around home security and home security, but there are still a handful of components and processes that can provide adequate security in today’s industry. A smart home without security technology protection is just an empty talk.

In 2018, the smart home industry has been moving frequently and news has continued.

Internationally, in March, Amazon spent $1 billion to acquire smart doorbell startup Ring; in June, Google announced a joint venture with French retail chain Carrefour, and subsequently invested $550 million in Chinese e-commerce Jingdong In the future, Apple will join the Carrefour and Jingdong channels to sell smart speakers and voice assistants. In early August, Apple joined the smart home mesh network standard Thread Group and became a member of the board of directors. On August 15, Samsung launched the smart home IoT platform. , released a new generation of Samsung AI smart assistant Bixby and smart home strategy.

Domestic, ZTE, Huawei, Xiaomi, Haier, Gree, Midea, Changhong and many other communication equipment companies and home appliance manufacturers have invested in the smart home Red Sea battle; ambitious Alibaba as an e-commerce company , also continue to develop smart home products. Smart homes have been in a tepid state since the fiery 2015. Technology giants and small and medium-sized companies want to eat this big cake. However, it is not easy to really gain a foothold in the smart home industry.

A super-strong and small start-up company is difficult to survive

Looking at the global smart home market, the business giant Amazon is riding a dust, followed by its rival Google, Apple Samsung is relatively bleak . Alibaba started a little late, but the momentum was amazing. According to the latest data from the market research company Strategy Analytics on August 15, 2018, this situation is expected to be temporarily difficult to shake.

In terms of smart speakers, Amazon still sits at the top of the list, with shipments reaching 4.8 million units, accounting for 41% of the global market. Followed by Google, its shipments were 3.2 million units, with a market share of 27.6%. Alibaba ranked third, with shipments reaching 800,000 units and a market share of 7%. Apple barely squeezed into the fourth position, selling about 700,000 HomePods in the second quarter, an increase from the same period last year.

Large enterprises continue to attack the city and always occupy the leading position in the smart home field. While continuously researching and developing new products to consolidate their positions, major companies have also merged and acquired small start-up companies to increase their equipment portfolio, making the living space of other smart home manufacturers increasingly compressed.

Amazon’s acquisition of Ring is a classic example. Ring has more than 1 million users in 2017, founder Jake · Seminov said in an interview with the Financial Times that he did not sell the company, thinking that with the expectations of consumers for any new product quality and With the support that comes with it, Ring is unlikely to compete with technology giants such as Samsung Electronics and Google in the smart home field. However, a few months later, he found himself caught up in the covet of Google and Amazon. Finally, Jacques · Seminov sells the company to Amazon to ensure it survives in the market.

Separate security devices have more security vulnerabilities

In addition to pressure from industry giants, smart home businesses are also facing a common problem —— network security. No matter which product the smart home industry is, the ultimate connection terminal is a mobile phone or a computer. There are many smart home products around home security and home security, but there are still a handful of components and processes that can provide adequate security in today’s industry. A smart home without security technology protection is just an empty talk. In recent years, the time for security breaches in smart home networks has occurred from time to time.

In August 2017, British security researcher Mark Barnes showed off the technology of invading Amazon Echo. With this technology, anyone can install malware on Echo and send the device’s voice input to a remote server. The new Echo released after Google has fixed the problem.

In January 2018, Trend Micro, a network security software company, confirmed that there are security holes in Sonos’s Sonars and Dr. Bose’s smart speakers, which can be used by hackers to play weird sounds or perform Alexa voice commands. Affecting smart home technologies such as door locks, air conditioners, and lighting controlled by these smart speaker voice assistants. The smart speaker manufacturer then released the relevant security patches.

On August 2, 2018, cyber security research team Cisco Talos published a paper stating that researchers at Samsung Smart ThingsHub (multiple DIY home networking devices designed to allow homeowners to remotely manage and monitor digital devices) ) Find 20 vulnerabilities, all of which are located in the central controller responsible for connecting to components of home IoT devices such as lights, thermostats, cameras, etc. This allows an attacker to control smart locks, remotely monitor smart home devices and perform other dangerous functions through a networked camera. A Samsung spokesperson quickly responded by saying that the device has been updated to fix the defect.

At present, smart home products can only rely on professional network security personnel to detect product technical vulnerabilities and submit them to vendors. Enterprises will update firmware in time according to feedback, fix vulnerabilities, and protect users’ privacy.This is extremely unfavorable for the overall development of the industry. It is necessary to formulate a set of unified standards as soon as possible so that the product inspection can be based on evidence, so that the market can develop steadily.

Conclusion: Although the smart home industry is optimistic, it also faces serious challenges. At the level of terminal-oriented consumers, the slow landing of products and the doubts of information security have caused some consumers to wait and see; the development of the industry is uneven, and there is no uniform standard, which has caused the development of the industry to fall into an embarrassing situation. Everything is hard to do at a glance, and smart homes have a long way to go, but one thing is certain: if companies want to gain a foothold in the smart home industry, intellectual property and patents are the key to success.



Relevant recommended products

TJK Rebar Process MACHINERY

50w Poly Solar Module With High Efficiency

260W Mono & Poly 260W/ 265W/270W/ 280W/300W/310W High Efficiency Solar Module

80W Mono Solar Panel Small Size Solar Panel

High Quality Low Price Smd 3528 Flexible Led Strip

Tips for cleaning the floor

The first waxing article. The number of floor waxing should not be frequent, and the floor should be properly waxed. Waxing can protect against moisture, damage, surface luminosity and easy cleaning, but if the number of waxing is too frequent, it will cause damage to the floor. Frequent waxing can cause waxy wax layers to superimpose, and there will be a layer of gray in the middle of the wax layer, which affects the waxing effect.

Now the average family is using a relatively affordable laminate flooring, the surface of the laminate floor is a layer of aluminum oxide, liquid such as moisture does not easily penetrate into the floor, so if the floor is waxed The wax layer can not penetrate into the inner layer of the floor, and can only be attached to the surface of the floor. When people walk, they will leave footprints. After a long time, the surface of the floor becomes like a ‘big face’, which affects the appearance of the floor and is difficult to wipe. Therefore, the laminate flooring should not be waxed.

When air drying, laminate flooring should not be cleaned and maintained with decontamination powder, and should not be polished with abrasive paper. It can be wiped with a wrung rag and then treated with a care solution. It is difficult to remove it with a special detergent.

Second cleaning article. Solid wood flooring should be wiped with a dry cotton mop in daily cleaning. In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a cotton swab. Do not use organic acids such as acid, alkaline solvents or gasoline. Solvent scrubbing. And do not place strong acid and strong alkaline substances on the floor.

The cleaning and maintenance of laminate flooring is relatively simple, but it should not be taken lightly. When cleaning, apply a damp mop that does not drip, and properly increase the surface humidity, which can effectively solve the gap and cracking of the floor. If it is greasy or smudged, wipe it with a cloth dampened with detergent.

Third to prevent small particles from scratching the floor. The small gravel stays on the floor surface for a long time, and after walking around, the traces of sand and gravel appear on the floor surface. In addition to gravel, dust, hard-soled shoes, metal sharps, and glass tiles are the nemesis of the floor’s skin. In order to reduce the wear of the particles, it is especially important to keep the floor clean. Pay attention to clean the floor after opening the window. If dust or gravel is found, it should be vacuumed and cleaned immediately. In addition, the ash on the floor should not be treated with a damp rag and a mop. The ash that is wrapped between them is likely to cause scratches on the surface of the paint film. Also, be careful not to let the floor touch the open flame or place it directly on the floor. Power electric heaters cannot directly place hot objects such as kettles and stoves. Home improvement network




Relevant recommended products

Aluminium Sheet China High Quality Roofing Pe Pvd Colour Coated

Welded Crbon Steel Pipe BS1387, ASTM A53

CLS-90 Concrete Mixing Plant

Packing Machine Filling and Sealing Machine Acfs-4r

Nespresso Compatible Coffee Machine_Z0101C

How to wax the marble floor?

600){this.width=600}” align=center src=”/userfiles/20170802170857837.jpg”>

(1) Place the waxing sign on the job site first.

(2) Lift the base and set the black fiber mat.

(3) Fit the wax water into the refrigerator of the multi-purpose washing machine.

(4) Control the machine, pull the water tank control rod, and evenly spray the wax on the ground.

(5) Control the machine direction, from left to right, walk back and forth 2~3

(6) Up and down the overlap of about 10CM2.

(7) After 5 minutes, use a water absorbing machine to dry the wax and old wax stains.

(8) Use a wet mop twice and then drag it with a mop.

(9) After the ground is dry, seal the wax.

(10) The waxed mop is soaked in wax water.

(11) Place the mop on the water pressure clamp and dry it evenly, then apply the wax water evenly on the ground.

(12) The layer is separated from the layer by about 30MΙN (according to the dryness of the hand).

(13) After about 3 days, the last layer of wax is dried and polished with a high speed polishing machine.

(14) Marble floor Once every two months.

Nowadays, marble flooring has become a must-have material for many homes, and natural stone is favored by consumers with its beautiful appearance. In daily life, the correct cleaning care can be Make the marble floor more beautiful and beautiful. The above is a detailed step for the operation steps, I hope to help you.




Relevant recommended products

3mm PVC Foam Sheet And PVC Foam Panelfor Advertising Use

SBS Modified Waterproof Membrance

Permanent Magnet pumps

Steel Coupler Rebar Scaffolding Tube of High Quality

Fiberglass Mosquito Fly Protection Window Screen Mesh

Old floor renovation should not be blind.

Silk flooring is a common material for floor decoration in modern home decoration due to its comfortable feet and natural fragrance. However, after a long period of trampling and natural conditions, the wooden floor will have more or less various losses. In order to keep the ground bright and avoid unnecessary expenses, floor renovation is a good choice, which can make the ground look new. Below, follow the small series to understand the precautions for floor renovation.

600){this.width=600}” align=center src=”/userfiles/20170802171752931.jpg”>

1, old floor performance is stable

>

Floor refurbishment refers to the process of sanding, scraping, lacquering, waxing and polishing the floor surface to make the old floor a new floor treatment method. This method is lower than the re-purchase of new floor, and the old floor Due to long-term use, performance has been stabilized and environmental performance is better than new flooring.

600){this.width=600}” align=center src=”/userfiles/20170802171752932.jpg”>

2, poor maintenance needs to be refurbished

floor renovation time and maintenance efforts have a lot to do. If you pay attention to the maintenance of the floor, there is no big problem. Even if it has been used for many years without obvious damage, there is no need to refurbish it. If you do not pay attention to the maintenance of the floor, there will be floor problems such as paint falling and cracking. If the refurbishment is carried out as soon as possible, if the problem is not dealt with in time, the problem of the floor will become more and more serious, and in the end, the floor can only be replaced.

600){this.width=600}” align=center src=”/userfiles/20170802171752933.jpg”>

3, what floor can be refurbished

>

After the three types of solid wood flooring, solid wood composite flooring and bamboo flooring are damaged, refurbishment measures can be taken, but the premise is that the surface of the floor reaches 4 mm. If the surface of the floor is too thin, it will be ground when grinding. The middle layer affects the service life of the floor. The laminate flooring is not recommended for renovation. First, the price is lower, the price of renovation and re-purchase is not much different. Second, the surface layer of the laminate floor is the hardest part, and the surface will be resistant when refurbished and polished. The wear layer is destroyed, revealing the middle glue layer, which easily causes the floor to age.

600){this.width=600}” align=center src=”/userfiles/20170802171753934.jpg”>

4, serious damage directly replaced

not all problematic floor can be refurbished, mildew, deformation and other serious damage to the floor can only be replaced directly. The mildew of the floor will generally penetrate into the interior of the floor. The grinding can only remove the surface, and there is mold in the interior of the floor; the deformation of the floor cannot be solved by grinding. If the floor has a large area of ​​mildew and deformation, it is recommended to re-purchase the new floor for laying.

600){this.width=600}” align=center src=”/userfiles/20170802171753935.jpg”>

5, partial renovation is not acceptable

>

Floor renovation is not recommended for partial renovation. The overall renovation of the floor in a space is better, and the effect of the new floor can be basically achieved. Partial renovation will result in new and old differences in the floor within the unified space. The longer the time, the more obvious the difference. Not conducive to the overall beauty of the home.




Relevant recommended products

Tea Can Production Lines

PPR Equal Tee Fittings Used in Industrial Fields from China

2018 China-made Superior Quality&Low Price Plastic Ppr Pipe Fittings

Polycrystalline Silicon Solar Modules 72Cell-295W

SUS316L No. 1 Finish Stainless Steel Plate

How does the KAA platform make money? KAA’s business model?

Korean KAA Business Model

Platform Mechanism

KAA Token

Token: KAA can be used as a digging in addition to trading with mainstream currencies. Mine awards, dividends, gift rewards, wealth management investments, commodity redemption, voting on the currency, etc.

Hosting Selection

The anchor submission data review is completed by —— completing the corresponding course tasks in the platform ——

Fans vote for the main broadcast, and the number of votes reached the top fifteen—— the anchor can successfully open the live broadcast room.

Anchor Broker and Earnings

Fans voted for the main broadcast and successfully opened the live room After that, become the anchor of the “broker,” brokers can enjoy 10% dividends on the rewards of the anchor.

KAA Direct Video

Token’s Currency Trading

In addition to the mainstream exchanges, KAA will also trade on the embedded exchanges launched by the platform. It can also be consumed in the mall inside the platform, including: physical goods, fan ecology, training courses, financial management strategies, etc.

Repurchase and Destroy

For a large number of rewards, the possible inflation may lead to the depreciation of the KAA currency, and the KAA officially deployed solution. The KAA official will take out 15% of the platform’s profits and use it to regularly repurchase the KAA in circulation and destroy it, and increase the dividend of the user TOKEN to protect the interests of the holder. According to the KAA repurchase model, the difference in the price of the KAA will affect the proportion of the final repurchase in the cycle, which has played a positive role in the stability of the TOKEN price.

KAA’s first-hand docking V letter: QQ3149031

The source of profit for the KAA platform?

Today we saw that all our income is based on KAA’s profit. basically. So how much money does KAA make? Take one of our sections for example. We will have our own exchange, a general exchange with 50W fans, and 5W people will trade every day. The transaction fee for one day is 100 million yuan. This is the exchange. Pure profit. Will be evenly distributed to our VIP level.

Example: In the first stage, we have a 100W fan exchange fee income of 100 million yuan / day

Achieved VIP1 has 1W people 100 million net income of 3% dividend is 300W then every People can be divided into 300 yuan per day

Achieving VIP2 has 5,000 people with 100 million net income of 5% dividend is 500W, then each person can be divided into 1,000 yuan per day

Achieved VIP3 has 2000 people 10% of the net income of 100 million net income is 1000W, then each person can be divided into 5,000 yuan per day

Achieving VIP4 has 1000% of 100 million net income, 15% of the dividend is 1500W, then each person can be divided into 15,000 yuan per day.

And this is just the income of the exchange, we will also open live awards, voting, purchasing, shopping malls, games in the second stage. Every sector is a big profit margin. Our VIP shareholders can be divided, and KAA will take out 80% of all total revenue. Such a big pattern will surely embrace the world and let us come together to meet the future.



Relevant recommended products

Plain Aluminim Foil Jumbo Roll for Cable and Wire Application

Cold Drawnd Seamless Steel pipe Made in China from CNBM

Women Sanitary Napkin Machine 900 model

PVC Celuka Foam Board/Sheet Transparent Flexible PVC Sheet

Solar Thermal Application and Glass Pipe Material solar thermal collector

The living room floor color material can not be ignored. How to choose?

First, the color Traditional Feng Shui also pay attention to the color of the ground, the home environment is bright and dark, the color of the floor of the hall should be more light and light, such as beige, light yellow, etc., avoid using too dark shades. Too deep and dark ground not only makes the occupants’ feelings heavy and heavy, but also makes the hidden dirt on the ground not easy to be found; the polishing degree of the ground is not suitable for too large, because the emitted light is too obvious, which will affect the home. Visual harmony. Second, the floor and floor tiles Floors are mainly divided into three categories: solid wood flooring, solid wood laminate flooring (reinforced flooring) and laminate flooring. The environmental protection of the solid wood flooring is the best among the three, followed by the parquet. Floor tiles are inherently radioactive. The color and softness of the floor are good, the affinity is very good, and the floor tiles are relatively stiff; in terms of heat preservation, the floor has advantages, while the floor tiles are relatively fast due to heat conduction, and the insulation performance is relatively poor, especially in the whole living room in winter. The feeling of giving people will be very cold and uncomfortable. If the living room is facing north, the situation will be more serious. For families with children and the elderly, due to the inconvenience of the elderly and the naughty and lively of the children, it is easy to fall and rub the small accident. In the choice of living room decoration, the damage of the floor tiles to the elderly and children is undoubtedly much more serious than the floor, so families like this kind of structure may choose the floor. The floor has two choices of rigid and soft in the graphic design. A pattern featuring a combination of straight lines such as squares, rectangles, and polygons, with masculine gas, is more suitable for shops that use male goods, and is a combination of curves such as circles, ovals, sectors, and geometric curves. It is a store that is soft and suitable for women’s products. Third, the elderly and children’s room floor decoration precautions Children’s room floor is best to lay natural wood flooring, because it is safe and easy to clean. Avoid using stone paving, consider the effects of radioactive materials contained in three materials that have not been certified, and do not place carpets. Although the safety of carpets is high, children who fall off are not easy to attach too much. Dust, long-term use can cause children with bronchitis and respiratory diseases. In the central area of ​​the house, the ground should be leveled. In a lot of homes, the owners built the building level in the living room, artificially causing the ground ups and downs. The design similar to Westernization is novel, but it is not easy to use. The traditional Feng Shui is more of a disadvantage, especially for families with old people and children. It is easy to be stumbled by accident. Some people put gravel in the doorway of the house to enhance the taste, but the floor is not flat, but it brings trouble to their own access.


Relevant recommended products

Copper Clad Aluminum Magnesium Wire

250W Poly Solar Panel in China with Full Certification

Polypropylene-Random Plastic Long siphon

China-made Top Quality Plastic PPR Pipe for Water Conveyance

Nonwoven Geotextile Fabric Price for Highway/Railway 500g/m2

The floor is unstable! You won’t choose!

Whether is the solid wood floor heating floor that is the exclusive high-end category for the floor heating users? Is it a stable and healthy material that can be shared by all the people? Is there a floor heating in the absence of floor heating? In the face of these problems, recent investigations have given clear answer. This winter, the country has less rain and a dry climate, so it is the best time to check the stability of the floor. In December 2014, in a survey of 12 households using Tiange pure solid wood floor heating and 25 households using ordinary solid wood flooring, it was found that there were no deformation problems in the 12 households with Tiange geothermal floor. However, 4 users of the traditional flat-cemented solid wood flooring have experienced different degrees of contraction and jointing.

600){this.width=600}” align=center src=”/userfiles/20170802170928842.jpg”>

Traditional Ping Users who buckled the solid wood floor have experienced different degrees of shrinkage and jointing.

The floor authoritative expert explained that the floor heating is heat radiant heating, which does not increase or decrease the indoor humidity; Many of them are air-conditioning heating, which will absorb the air moisture in the room. In the case of low ambient humidity, the effect of ‘snowing on the snow’ will be formed. In addition, the traditional solid wood floor adopts the flat connection and the keel fixed installation method, and the humidity is low and shrinks. When the amount is large, it cannot be translated as a whole, and naturally there will be cracking and separation.

Therefore: the lock-type solid wood floor heating floor promoted by Tiange is essentially a new generation of solid wood flooring technology. The reason why it can be used for floor heating is that it is not easy to be deformed. It is not that the category is the ‘patent’ of the floor heating user. Therefore, in the current situation that air conditioners are popular and used for a long time, the non-floor heating environment paving healthy solid wood flooring also needs to pay attention to stability. Sexual requirements, choose solid wood Hot floors are undoubtedly the best choice.


Relevant recommended products

High Quality Galvanized U Type Wire

China New PPR Eblow Watering Irrigation used in Industrial Fields

PPR Pipe and Fitting for Hot and Cold Water Supply from China Factory

Sealing Machine Automatic Adhesive Tape Carton

Geocomposite Geomembrane for Rock fill